Single-Phase Power Calculator

Calculate real power in a single-phase AC circuit, including power factor.

P = V × I × PF
  • P = real power (W)
  • V = RMS voltage
  • I = RMS current
  • PF = power factor (0–1)

Inputs

0–1

Result

Enter values and press Calculate.
P = V × I × PF

For educational and general reference only. Results depend on the accuracy of the values entered and are rounded to the selected precision. Verify critical designs with a qualified engineer and applicable codes. Full disclaimer

Concept and formula

Calculate real power in a single-phase AC circuit, including power factor. The governing relationship is P = V × I × PF. The symbols used are P = real power (W); V = RMS voltage; I = RMS current; PF = power factor (0–1). This equation expresses how the known quantities combine to produce the requested engineering result and supports transparent checking of the method.

For a reliable calculation, choose the unit beside each input and enter values that describe the same physical situation. The calculator converts compatible units internally before applying the formula, then lets you display the result in an appropriate unit. Its step-by-step working shows the substituted values and arithmetic, making unit mistakes or unexpected assumptions easier to spot. Keep all measurements consistent with the definitions shown above.

The result should be interpreted in the context of electrical circuits and equipment. Real designs can also depend on material properties, tolerances, losses, safety factors, boundary conditions, and applicable codes that are not represented by a single equation. Use sensible significant figures based on the accuracy of the inputs, and independently verify results used for safety-critical, contractual, or regulated work.

Worked example

Using Voltage (RMS) = 230 V, Current (RMS) = 10 A, Power factor = 1 0–1, substitute the values into P = V × I × PF. The calculated result is Real power = 2.3 kW, Apparent power = 2.3 kVA, Reactive power = 0 kVAR.

Frequently asked questions

What formula does the Single-Phase Power Calculator use?

It uses P = V × I × PF. P = real power (W); V = RMS voltage; I = RMS current; PF = power factor (0–1).

Can I use different units in the Single-Phase Power Calculator?

Yes. Where unit selectors are shown, values are converted to compatible base units before the formula is evaluated.

How should I interpret the single-phase power result?

Treat it as an engineering calculation based on the values entered. Match significant figures to your input accuracy and apply relevant design factors or standards separately.

More electrical calculators