Three-Phase Power Calculator
Calculate real power for a balanced three-phase load using line-to-line voltage and line current.
- P = real power (W)
- V_L = line-to-line voltage
- I_L = line current
- PF = power factor
Result
For educational and general reference only. Results depend on the accuracy of the values entered and are rounded to the selected precision. Verify critical designs with a qualified engineer and applicable codes. Full disclaimer
Concept and formula
Calculate real power for a balanced three-phase load using line-to-line voltage and line current. The governing relationship is P = √3 × V_L × I_L × PF. The symbols used are P = real power (W); V_L = line-to-line voltage; I_L = line current; PF = power factor. This equation expresses how the known quantities combine to produce the requested engineering result and supports transparent checking of the method.
For a reliable calculation, choose the unit beside each input and enter values that describe the same physical situation. The calculator converts compatible units internally before applying the formula, then lets you display the result in an appropriate unit. Its step-by-step working shows the substituted values and arithmetic, making unit mistakes or unexpected assumptions easier to spot. Keep all measurements consistent with the definitions shown above.
The result should be interpreted in the context of electrical circuits and equipment. Real designs can also depend on material properties, tolerances, losses, safety factors, boundary conditions, and applicable codes that are not represented by a single equation. Use sensible significant figures based on the accuracy of the inputs, and independently verify results used for safety-critical, contractual, or regulated work.
Worked example
Using Line voltage = 400 V, Line current = 10 A, Power factor = 0.85 0–1, substitute the values into P = √3 × V_L × I_L × PF. The calculated result is Real power = 5.889 kW, Apparent power = 6.928 kVA.
Frequently asked questions
What formula does the Three-Phase Power Calculator use?
It uses P = √3 × V_L × I_L × PF. P = real power (W); V_L = line-to-line voltage; I_L = line current; PF = power factor.
Can I use different units in the Three-Phase Power Calculator?
Yes. Where unit selectors are shown, values are converted to compatible base units before the formula is evaluated.
How should I interpret the three-phase power result?
Treat it as an engineering calculation based on the values entered. Match significant figures to your input accuracy and apply relevant design factors or standards separately.
