Brick Quantity Calculator

Estimate bricks for a solid wall using brick size and mortar joint thickness.

N = V_wall / V_brick+mortar × (1 + waste %)
  • V_wall = L × H × wall thickness
  • V_brick+mortar = (l+j)(w+j)(h+j)

Inputs

%

Result

Enter values and press Calculate.
N = V_wall / V_brick+mortar × (1 + waste %)

For educational and general reference only. Results depend on the accuracy of the values entered and are rounded to the selected precision. Verify critical designs with a qualified engineer and applicable codes. Full disclaimer

Concept and formula

Estimate bricks for a solid wall using brick size and mortar joint thickness. The governing relationship is N = V_wall / V_brick+mortar × (1 + waste %). The symbols used are V_wall = L × H × wall thickness; V_brick+mortar = (l+j)(w+j)(h+j). This equation expresses how the known quantities combine to produce the requested engineering result and supports transparent checking of the method.

For a reliable calculation, choose the unit beside each input and enter values that describe the same physical situation. The calculator converts compatible units internally before applying the formula, then lets you display the result in an appropriate unit. Its step-by-step working shows the substituted values and arithmetic, making unit mistakes or unexpected assumptions easier to spot. Keep all measurements consistent with the definitions shown above.

The result should be interpreted in the context of civil engineering estimates and dimensional checks. Real designs can also depend on material properties, tolerances, losses, safety factors, boundary conditions, and applicable codes that are not represented by a single equation. Use sensible significant figures based on the accuracy of the inputs, and independently verify results used for safety-critical, contractual, or regulated work.

Worked example

Using Wall length = 10 m, Wall height = 10 m, Wall thickness = 230 mm, Brick length = 190 mm, Brick width = 90 mm, Brick height = 90 mm, Mortar joint = 10 mm, Wastage = 5 %, substitute the values into N = V_wall / V_brick+mortar × (1 + waste %). The calculated result is Bricks required = 12,080 bricks, Wall volume = 23 m³.

Frequently asked questions

What formula does the Brick Quantity Calculator use?

It uses N = V_wall / V_brick+mortar × (1 + waste %). V_wall = L × H × wall thickness; V_brick+mortar = (l+j)(w+j)(h+j).

Can I use different units in the Brick Quantity Calculator?

Yes. Where unit selectors are shown, values are converted to compatible base units before the formula is evaluated.

How should I interpret the brick quantity result?

Treat it as an engineering calculation based on the values entered. Match significant figures to your input accuracy and apply relevant design factors or standards separately.

More civil calculators