Geometric Volume Calculator
Select a three-dimensional shape, enter its required dimensions in any supported length units, and calculate its volume with the applicable formula.
- V = volume
- L, W, H = dimensions
- subscripts o and i = outer and inner dimensions
- r = radius
- R = outer radius
- h = perpendicular height
Result
For educational and general reference only. Results depend on the accuracy of the values entered and are rounded to the selected precision. Verify critical designs with a qualified engineer and applicable codes. Full disclaimer
Concept and formula
Select a three-dimensional shape, enter its required dimensions in any supported length units, and calculate its volume with the applicable formula. The governing relationship is the formula shown above for the selected case. The symbols used are V = volume; L, W, H = dimensions; subscripts o and i = outer and inner dimensions; r = radius; R = outer radius; h = perpendicular height. This equation expresses how the known quantities combine to produce the requested engineering result and supports transparent checking of the method.
For a reliable calculation, choose the unit beside each input and enter values that describe the same physical situation. The calculator converts compatible units internally before applying the formula, then lets you display the result in an appropriate unit. Its step-by-step working shows the substituted values and arithmetic, making unit mistakes or unexpected assumptions easier to spot. Keep all measurements consistent with the definitions shown above.
The result should be interpreted in the context of civil engineering estimates and dimensional checks. Real designs can also depend on material properties, tolerances, losses, safety factors, boundary conditions, and applicable codes that are not represented by a single equation. Use sensible significant figures based on the accuracy of the inputs, and independently verify results used for safety-critical, contractual, or regulated work.
Worked example
Using Geometric Shape = Solid Cuboid (V = L × W × H), Length (L) = 10 m, Width (W) = 10 m, Height (H) = 10 m, substitute the values into Solid cuboid: V = L × W × H · Hollow cuboid: V = LₒWₒHₒ − LᵢWᵢHᵢ · Cylinder: V = πr²h · Hollow cylinder: V = πh(R² − r²) · Sphere: V = ⁴⁄₃πr³ · Hollow sphere: V = ⁴⁄₃π(R³ − r³) · Solid cone: V = ⅓πr²h · Hollow cone: V = ⅓πh(R² − r²). The calculated result is Solid Cuboid Volume = 1,000 m³.
Frequently asked questions
What formula does the Geometric Volume Calculator use?
It uses Solid cuboid: V = L × W × H · Hollow cuboid: V = LₒWₒHₒ − LᵢWᵢHᵢ · Cylinder: V = πr²h · Hollow cylinder: V = πh(R² − r²) · Sphere: V = ⁴⁄₃πr³ · Hollow sphere: V = ⁴⁄₃π(R³ − r³) · Solid cone: V = ⅓πr²h · Hollow cone: V = ⅓πh(R² − r²). V = volume; L, W, H = dimensions; subscripts o and i = outer and inner dimensions; r = radius; R = outer radius; h = perpendicular height.
Can I use different units in the Geometric Volume Calculator?
Yes. Where unit selectors are shown, values are converted to compatible base units before the formula is evaluated.
How should I interpret the geometric volume result?
Treat it as an engineering calculation based on the values entered. Match significant figures to your input accuracy and apply relevant design factors or standards separately.
