Energy Converter
Type a value and choose units — results update instantly. Conversion factors follow SI and NIST definitions.
| J | 3,600,000 |
| kJ | 3,600 |
| MJ | 3.6 |
| Wh | 1,000 |
| kWh | 1 |
| cal | 860,421 |
| kcal | 860.421 |
| BTU | 3,412.14 |
For educational and general reference only. Results depend on the accuracy of the values entered and are rounded to the selected precision. Verify critical designs with a qualified engineer and applicable codes. Full disclaimer
Concept and formula
Type a value and choose units — results update instantly. Conversion factors follow SI and NIST definitions. This converter changes a energy value from one recognized unit to another without changing the physical quantity it represents. The working relationship is converted value = source value × 3.6. A conversion factor is a ratio of equivalent measurements, so multiplying by it replaces the original unit while preserving the measured amount.
Select the source and target units, enter a value, and read the converted result. The tool uses defined SI-based factors for scale conversions and the appropriate offset relationship for temperature. It also displays a comparison table, which is useful when several units must be checked at once. Swapping the units reverses the direction of conversion without changing the underlying method.
Conversion accuracy cannot exceed the accuracy of the original measurement. Choose significant figures that reflect the source data rather than reporting extra digits as if they were measured precision. Before using a converted value in design work, confirm that the selected units describe the same dimension and that any industry convention, nominal size, gauge, or local standard is handled separately.
Worked example
For example, enter 10 kWh. Using converted value = source value × 3.6, the converted result is 36 MJ.
Frequently asked questions
How does the Energy Converter work?
It converts the entered energy value through its SI definition, then expresses the same quantity in the selected target unit.
Does the Energy Converter change the measured quantity?
No. A unit conversion changes only the numerical representation and unit label, not the physical amount.
How many significant figures should I use?
Use no more significant figures than the least precise source measurement. Extra displayed digits do not add measurement accuracy.
