Gear Ratio Calculator

Compute the ratio between a driving and driven gear, and the resulting output speed.

i = Z₂ / Z₁, N₂ = N₁ / i
  • i = gear ratio
  • Z₁ = driver teeth
  • Z₂ = driven teeth
  • N₁, N₂ = input/output speed

Inputs

teeth

teeth

Result

Enter values and press Calculate.
i = Z₂ / Z₁, N₂ = N₁ / i

For educational and general reference only. Results depend on the accuracy of the values entered and are rounded to the selected precision. Verify critical designs with a qualified engineer and applicable codes. Full disclaimer

Concept and formula

Compute the ratio between a driving and driven gear, and the resulting output speed. The governing relationship is i = Z₂ / Z₁, N₂ = N₁ / i. The symbols used are i = gear ratio; Z₁ = driver teeth; Z₂ = driven teeth; N₁, N₂ = input/output speed. This equation expresses how the known quantities combine to produce the requested engineering result and supports transparent checking of the method.

For a reliable calculation, choose the unit beside each input and enter values that describe the same physical situation. The calculator converts compatible units internally before applying the formula, then lets you display the result in an appropriate unit. Its step-by-step working shows the substituted values and arithmetic, making unit mistakes or unexpected assumptions easier to spot. Keep all measurements consistent with the definitions shown above.

The result should be interpreted in the context of mechanical systems, machines, and equipment. Real designs can also depend on material properties, tolerances, losses, safety factors, boundary conditions, and applicable codes that are not represented by a single equation. Use sensible significant figures based on the accuracy of the inputs, and independently verify results used for safety-critical, contractual, or regulated work.

Worked example

Using Driver gear teeth = 10 teeth, Driven gear teeth = 10 teeth, substitute the values into i = Z₂ / Z₁, N₂ = N₁ / i. The calculated result is Gear ratio = 1 : 1.

Frequently asked questions

What formula does the Gear Ratio Calculator use?

It uses i = Z₂ / Z₁, N₂ = N₁ / i. i = gear ratio; Z₁ = driver teeth; Z₂ = driven teeth; N₁, N₂ = input/output speed.

Can I use different units in the Gear Ratio Calculator?

Yes. Where unit selectors are shown, values are converted to compatible base units before the formula is evaluated.

How should I interpret the gear ratio result?

Treat it as an engineering calculation based on the values entered. Match significant figures to your input accuracy and apply relevant design factors or standards separately.

More mechanical calculators