Rotational Power Calculator
Mechanical rotational power (P) is the product of applied torque (T) and rotational angular velocity (ω). Since mechanical work is torque multiplied by angular displacement (W = T × θ), power also represents the rate of doing work over time (P = W / t).
- P = mechanical power (kW, hp, W, PS)
- T = shaft torque (N·m, kN·m, lbf·ft, lbf·in)
- ω = rotational speed / angular velocity (RPM, rad/s, Hz)
- W / t = work done per unit time (Joules/sec, Watts)
Result
For educational and general reference only. Results depend on the accuracy of the values entered and are rounded to the selected precision. Verify critical designs with a qualified engineer and applicable codes. Full disclaimer
Concept and formula
Mechanical rotational power (P) is the product of applied torque (T) and rotational angular velocity (ω). Since mechanical work is torque multiplied by angular displacement (W = T × θ), power also represents the rate of doing work over time (P = W / t). The governing relationship is P = T × ω. The symbols used are P = mechanical power (kW, hp, W, PS); T = shaft torque (N·m, kN·m, lbf·ft, lbf·in); ω = rotational speed / angular velocity (RPM, rad/s, Hz); W / t = work done per unit time (Joules/sec, Watts). This equation expresses how the known quantities combine to produce the requested engineering result and supports transparent checking of the method.
For a reliable calculation, choose the unit beside each input and enter values that describe the same physical situation. The calculator converts compatible units internally before applying the formula, then lets you display the result in an appropriate unit. Its step-by-step working shows the substituted values and arithmetic, making unit mistakes or unexpected assumptions easier to spot. Keep all measurements consistent with the definitions shown above.
The result should be interpreted in the context of mechanical systems, machines, and equipment. Real designs can also depend on material properties, tolerances, losses, safety factors, boundary conditions, and applicable codes that are not represented by a single equation. Use sensible significant figures based on the accuracy of the inputs, and independently verify results used for safety-critical, contractual, or regulated work.
Worked example
Using Shaft Torque (T) = 10 N·m, Rotational Speed (N / ω) = 10 rpm, substitute the values into P = T × ω. The calculated result is Mechanical Power = 0.01047 kW.
Frequently asked questions
What formula does the Rotational Power Calculator use?
It uses P = T × ω. P = mechanical power (kW, hp, W, PS); T = shaft torque (N·m, kN·m, lbf·ft, lbf·in); ω = rotational speed / angular velocity (RPM, rad/s, Hz); W / t = work done per unit time (Joules/sec, Watts).
Can I use different units in the Rotational Power Calculator?
Yes. Where unit selectors are shown, values are converted to compatible base units before the formula is evaluated.
How should I interpret the rotational power result?
Treat it as an engineering calculation based on the values entered. Match significant figures to your input accuracy and apply relevant design factors or standards separately.
